Serving Greensboro and towns across Guilford CountyCall (336) 962-4282

On US 70 east of Greensboro

Epoxy Flooring in McLeansville, NC

Warehouse-grade floors and garage coatings for east Guilford County.

  • Free on-site estimates across Guilford County
  • Moisture readings on the slab before we coat it
  • Written quote that lists every prep step and coat

Where Freight Meets Farmland

Epoxy flooring in McLeansville serves two very different customers. Along US 70 and near the I-40/I-85 interchange, distribution and commercial buildings need floors that take constant traffic. North of town, homes sit among farmland and woods, with garages and sheds that see a mix of cars, mowers and projects.

Distribution-scale floors

Publix finished a distribution center along US 70 here in 2022 at an estimated cost of $300 million. Large food and freight buildings like that run forklifts and pallet jacks all day. Suppliers, cold storage, truck maintenance shops and smaller warehouses nearby face the same wear on a smaller scale. We recommend a thick 100% solids epoxy or urethane system with clear line striping, and we can coat in phases so docks stay open.

Creeks on two sides

South Buffalo Creek forms the western edge of McLeansville, and Boldmoon Preserve fronts Reedy Fork Creek. Homes on low ground near creeks can see more moisture in the slab after heavy rain. We take moisture readings during the estimate and if the numbers are high, a damp-tolerant primer goes on rather than hoping it works out.

Get a Free Estimate

Rural and suburban garages

The northern part of the community borders rolling farmland and wooded lots. Detached garages and outbuildings there are often used for equipment, and slabs may carry oil or fertilizer residue. We degrease and grind before coating so the floor bonds to clean concrete.

Interstate commuting

With the I-40/I-85 interchange just south and I-785 on the west side, many residents spend a lot of time on treated winter roads. A sealed flake floor keeps that brine off bare concrete and rinses clean. A little grit in the topcoat adds footing when the garage floor is wet.

Planning a warehouse floor or a home garage? Get a free estimate or call (336) 962-4282.

McLeansville at a Glance

  • Major distribution center. A Publix distribution center along US 70 was finished in 2022 at an estimated cost of $300 million.
  • Creek boundaries. South Buffalo Creek forms the western edge, and Boldmoon Preserve has frontage on Reedy Fork Creek.
  • Interstate access. The I-40/I-85 interchange lies south of the town center, and I-785 runs through the western area.
  • Unincorporated community. McLeansville is a census-designated place of 1,113 people (2020), about 9 miles east of Greensboro.
Porch & Patio Coatings in Greensboro, NC

McLeansville Questions

Can you coat a warehouse in McLeansville without shutting it down?

We usually work in sections or during off-hours. Fast-curing systems can let traffic return sooner, and we lay out the plan in writing first.

My house is near a creek. Is my garage slab too damp to coat?

Not necessarily. We measure moisture first. Many damp slabs can be coated with the right primer; a few need drainage work before any coating.

Do you add striping or safety markings?

Yes. We can add aisle lines, pedestrian walkways and loading zone markings as part of a commercial floor.

What finish works for a garage with a tractor or mower?

A full flake system with a thick topcoat. It handles weight and fluids and is easy to sweep.

Free Estimates in McLeansville, NC

Warehouse, shop or garage in McLeansville: schedule a no-cost estimate.

Call Now: (336) 962-4282