South of Greensboro, north of Climax

Epoxy Flooring in Pleasant Garden, NC

Garage and shed floors for a town that is half country, half suburb.

Free on-site estimates across Guilford County
Moisture readings on the slab before we coat it
Written quote that lists every prep step and coat

Half Country, Half Suburb

Epoxy flooring in Pleasant Garden splits between two very different property types in one small town. Some homes sit in subdivisions close to Greensboro; others are on open land with sheds, shop buildings and equipment that sees real work. We coat both, and we start by asking what actually happens on the floor.

A split between rural and urban

The 2020 census counted 57.7% of Pleasant Garden residents in rural areas and 42.3% in urban ones. On the rural side, an equipment shed or workshop may hold a tractor, a log splitter or a welding bench. Those floors need a thick, chemical-resistant system and often a darker color that hides staining. In a suburban two-car garage, a lighter flake blend and a glossy topcoat usually make more sense.

Diesel, hydraulic fluid and grease

Work equipment leaves behind fluids that soak into raw concrete and keep wicking back to the surface. Before coating a slab like that, we degrease it, grind off the contaminated layer and test a small area for adhesion. If oil has gone too deep, we tell you, rather than coating over a problem that will lift the floor later.

Get a Free Estimate

Three highways, lots of commuting

Interstate 85 forms the town's northern edge, while US 421 and Randleman Road run along its east and west sides. Commuters bring back whatever the road crews put down in winter. A sealed flake floor keeps salty water from pitting the concrete and wipes clean once the weather turns.

Small town, long history

Pleasant Garden was first settled in 1786 but only incorporated in 1997. That mix shows up in the slabs we see: some garages are recent, others are decades old and have been patched more than once. Old patches and paint have to come off so the coating bonds to sound concrete, and we price that work separately so it is clear.

Need a floor that can handle real work? Get a free estimate or call (336) 962-4282.

Pleasant Garden Basics

Part rural, part urban. At the 2020 census, 57.7% of residents lived in rural areas and 42.3% in urban areas.
Bordered by highways. Interstate 85 borders the town to the north, with US 421 and Old US 220 (Randleman Road) on the east and west.
Recent incorporation. First settled in 1786, the town incorporated in 1997 after splitting from Fentress Township.
Low vacancy. Of 2,051 housing units in 2020, the homeowner vacancy rate was just 0.7%.

Polyaspartic Floor Coatings in Greensboro, NC

Our Services in Pleasant Garden, NC

Pleasant Garden Questions

Can you coat an equipment shed with oil-stained concrete?

Often, after deep cleaning and grinding. We test adhesion on the worst spot first. If the oil has soaked too far in, we will explain your options instead of guessing.

What color hides stains in a Pleasant Garden workshop?

Gray and tan flake blends hide tire marks and small stains well. Very light colors look great but show every drip.

Is epoxy too slippery for a shop with a welding bench?

We add texture to the topcoat for shop floors. We also keep the coating away from spots where hot slag lands regularly, or suggest a mat there.

Do you quote patch removal separately?

Yes. Taking up old paint or failed patches gets a separate line on the quote, which shows how much of the total goes to prep.

Free Estimates in Pleasant Garden, NC

Garage, shed or workshop in Pleasant Garden? We will come out and quote it free.

Call (336) 962-4282 Free Estimate